通风管道怎么清洗？

发布人：   发布时间：2020-05-27 13:32:09

　　空调通风管道内，在长期运用中，会积聚大量的灰尘，不但会严重污染室内的空气，而且会增加风管系统阻力，使空调系统的风量降落。更重要的是，风管内空气的温度和湿度十分适合有害细菌的生长和繁衍，直接成为一个隐秘的污染源。

　　In the ventilation duct of central air conditioning, a large amount of dust will accumulate in the long-term use, which will not only seriously pollute the indoor air, but also increase the resistance of the air duct system, and make the air volume of central air conditioning system fall. More importantly, the air temperature and humidity in the air duct are very suitable for the growth and reproduction of harmful bacteria, which directly becomes a hidden source of pollution.

　　集中式通风管道除尘、清洗和流程

　　Centralized ventilation pipe dedusting, cleaning and disinfection process

　　一、清洗前的准备

　　1、 Preparation before cleaning

　　1.1、依据装置图纸和所要施工的现场理解新风管、回风管、送风管系统的规划；

　　1.1. Understand the planning of fresh air duct, return air duct and air supply duct system according to the device drawings and the construction site;

　　1.2、以风管系统为单位除尘、清洗和；

　　1.2. Take the air duct system as the unit for dust removal, cleaning and disinfection;

　　1.3、选定清洗口和吸尘口，如运用第六代管道机器人，在选择清洗口口，对清洗单元的末端停止封锁，清洗和收尘同时在清洗完成；

　　1.3. Select the cleaning port and dust suction port. If the sixth generation pipeline robot is used, stop blocking the end of the cleaning unit when selecting the cleaning port. The cleaning and dust collection are completed at the same time;

　　1.4、运用通风管监视监控系统检查管道内污染水平、管道构造内特性，分离通风管道的尺寸和间隔空中的高度，选择适宜的清洗设备（管道机器人、软轴）。

　　1.4 use the ventilation pipe monitoring and control system to check the pollution level in the pipe and the characteristics in the pipe structure, separate the size of the ventilation pipe and the height in the air, and select the appropriate cleaning equipment (pipe robot, flexible shaft).

　　1.5、清洗设备及工具运输到指定地点，并用毡布遮盖好施工地点下方的物品，电工开端接 通临 时电源，经过之前肯定的清洗口，对风管停止清洗作业。

　　1.5. The cleaning equipment and tools shall be transported to the designated place, and the items under the construction site shall be covered with felt cloth. The electrician shall start to connect the temporary power supply, and stop the cleaning operation of the air duct after passing through the previously confirmed cleaning port.

　　二、清洗工作的注意事项

　　2、 Precautions for cleaning

　　2.1、清洗该操作段的防火阀，如清洗不到的应在防火阀一侧启齿清洗，清洗完成后封锁切口，恢复保温。

　　2.1. Clean the fire damper of the operation section. If the fire damper cannot be cleaned, it shall be cleaned at one side of the fire damper. After cleaning, seal the incision and restore the heat preservation.

　　2.2、录像监视系统对空调风管清洗前、中、后停止监测及录像，保管图片。

　　2.2 the video monitoring system shall stop monitoring and video recording before, during and after cleaning the air duct of the central air conditioner, and keep the pictures.

　　2.3、拆掉吸气管和吸管盘，恢复清洗、过的风口，用预先准备好的原系统同种资料，用铆钉枪封锁风口，并用密封胶将缝隙密封，且恢复保温资料。

　　2.3. Remove the suction pipe and suction plate, recover the cleaned and sterilized air outlet, use the same data of the original system prepared in advance, use the rivet gun to block the air outlet, seal the gap with sealant, and recover the heat preservation data.

　　2.4、检查风管吊顶的强度，如强度不够应在顶棚打收缩螺栓，用预制的角钢托盘停止加固，以不影响风管强度为准绳，严厉按规范操作。风口及过滤网撤除后到指定地点用高压水枪停止清洗。

　　2.4 check the strength of the ceiling of the air duct. If the strength is not enough, the shrinkage bolt shall be made on the ceiling, and the prefabricated angle steel tray shall be used to stop the reinforcement, so as not to affect the strength of the air duct, and the operation shall be strictly in accordance with the specifications. Remove the tuyere and filter screen and stop cleaning with high-pressure water gun at the designated place.

　　2.5、风机盘管清洗。

　　2.5. Fan coil cleaning.

　　2.6、清洗工作完成后，由甲方单位停止验收，并在竣工报告和验收报告上签字。

　　2.6 after cleaning, Party A shall stop acceptance and sign the completion report and acceptance report.

　　三、扫尾工作

　　3、 Finishing work

　　3.1、施工中所产生的的渣滓全部密封，竣工分开施工现场时，装车带走；

　　3.1. All the dregs generated in the construction shall be sealed. When the completion is separated from the construction site, they shall be loaded and taken away;

　　3.2、施工中接的暂时电源、现场戒备标识或围挡停止及时回复施工前原貌，避免给甲方单位带来不便和形成损失

　　3.2. The temporary power supply, on-site alert sign or enclosure connected during the construction shall be restored to the original appearance before the construction to avoid inconvenience and loss to Party A

　　以上是对通风管道怎么清理的详细过程，希望对你们有所帮助，本文由济南通风管道友情分享，想要了解更多欢迎网站留言。

　　The above is the detailed process of how to clean and disinfect the ventilation pipe. I hope it can help you. This article is shared by Jinan ventilation pipe company. If you want to know more, welcome to our website Leaving a message.